Originally Posted By CMcAllister
Originally Posted By crackedback
Don't need a single bolt or chain to get the pump out.

Stand it on the bellhousing, tap tailshaft. Usually falls right out.

Watch the how to rebuild a 727 video, it's in that too.


That might work, if the tailhousing was off of it, but everything in front of the output shaft would come along with it. And hit the floor if someone wasn't able to catch it. Sounds a little "rural" to me.


In a pinch this works if you first adjust the front band tight.
That holds the front clutch retainer and everything behind it.

Only thing that will come out then is the pump. And of course any fluid if you don’t drain the trans.

Last edited by Transman; 02/16/19 02:12 AM.