there won't be enough volume above the runner if the top is put on right there.
there is no taper to the runners because the runners are stock material that was cut to length. 5-10 degree taper is usually what you need to an engine like this. the runners are the hardest part. making the flanges is easy.
looks good for a first attempt. I'd be curious as to how well it works. definitely a higher rpm intake than the factory one with the short runners.
Superior Design Concepts 2574 Elliott Dr Troy MI 48083 jerry@sdconcepts.com www.sdconcepts.com Facebook page: Superior Design Concepts www.bcrproducts.com