Re-drilling axles for 5/8" studs

Print Thread

Re: Re-drilling axles for 5/8" studs [Re: 72chrgrally] #2416357 12/10/17 06:50 PM 12/10/17 06:50 PM
Joined: Sep 2003 Posts: 2,175 Duloc T The Shadow top fuel
The Shadow top fuel T Joined: Sep 2003 Posts: 2,175 Duloc	The axles are tough. I did them for Dwight after strange told him the same thing. Carbide tooling and a proper tap it can be done. I think the tap was around $80

Entire Thread
Subject	Posted By	Posted
Re-drilling axles for 5/8" studs	72chrgrally	12/10/17 07:18 AM
Re: Re-drilling axles for 5/8" studs	Dave Hall	12/10/17 07:51 AM
Re: Re-drilling axles for 5/8" studs	72chrgrally	12/10/17 03:56 PM
Re: Re-drilling axles for 5/8" studs	hemi-itis	12/10/17 06:57 PM
Re: Re-drilling axles for 5/8" studs	MR_P_BODY	12/10/17 11:41 PM
Re: Re-drilling axles for 5/8" studs	Blucuda413	12/10/17 08:24 PM
Re: Re-drilling axles for 5/8" studs	72chrgrally	12/10/17 08:48 PM
Re: Re-drilling axles for 5/8" studs	The Shadow	12/10/17 10:50 PM
Re: Re-drilling axles for 5/8" studs	11secdart	12/10/17 11:04 PM
Re: Re-drilling axles for 5/8" studs	72chrgrally	12/11/17 12:19 AM
Re: Re-drilling axles for 5/8" studs	CMcAllister	12/11/17 02:35 AM
Re: Re-drilling axles for 5/8" studs	Dave Hall	12/11/17 05:31 AM
Re: Re-drilling axles for 5/8" studs	rowin4	12/11/17 08:07 AM
Re: Re-drilling axles for 5/8" studs	CMcAllister	12/11/17 07:37 PM
Re: Re-drilling axles for 5/8" studs	SportF	12/12/17 02:02 AM
Re: Re-drilling axles for 5/8" studs	MR_P_BODY	12/12/17 02:27 AM
Re: Re-drilling axles for 5/8" studs	rowin4	12/12/17 06:25 AM
Re: Re-drilling axles for 5/8" studs	Locomotion	12/12/17 02:28 PM
Re: Re-drilling axles for 5/8" studs	SportF	12/12/17 04:20 PM
Re: Re-drilling axles for 5/8" studs	OUTLAWSSAA	12/13/17 03:14 AM
Re: Re-drilling axles for 5/8" studs	an8sec70cuda	12/13/17 04:05 PM
Re: Re-drilling axles for 5/8" studs	rowin4	12/12/17 02:31 AM
Re: Re-drilling axles for 5/8" studs	CMcAllister	12/12/17 04:58 AM
Re: Re-drilling axles for 5/8" studs	rowin4	12/12/17 05:04 AM
Re: Re-drilling axles for 5/8" studs	Sport440	12/12/17 05:38 AM
Re: Re-drilling axles for 5/8" studs	moparmitch	12/12/17 01:58 PM
Re: Re-drilling axles for 5/8" studs	DoctorDiff	12/14/17 05:16 AM
Re: Re-drilling axles for 5/8" studs	Dave Hall	12/14/17 08:05 AM
Re: Re-drilling axles for 5/8" studs	Triple Threat	01/05/18 07:23 PM
Re: Re-drilling axles for 5/8" studs	greendart408	01/05/18 07:32 PM
Re: Re-drilling axles for 5/8" studs	J_BODY	12/18/17 01:17 AM
Re: Re-drilling axles for 5/8" studs	72chrgrally	12/18/17 10:24 PM
Re: Re-drilling axles for 5/8" studs	J_BODY	01/05/18 03:08 AM
Re: Re-drilling axles for 5/8" studs	Dave Hall	01/05/18 06:54 AM
Re: Re-drilling axles for 5/8" studs	J_BODY	01/06/18 01:59 AM
Re: Re-drilling axles for 5/8" studs	Dave Hall	01/06/18 04:06 AM
Re: Re-drilling axles for 5/8" studs	dartman366	01/06/18 06:11 PM
Re: Re-drilling axles for 5/8" studs	rowin4	01/05/18 08:05 AM
Re: Re-drilling axles for 5/8" studs	J_BODY	01/18/18 06:05 AM
Re: Re-drilling axles for 5/8" studs	cudaman1969	01/06/18 12:49 AM
Re: Re-drilling axles for 5/8" studs	J_BODY	01/05/18 03:07 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To