Wire/Groove Around Combustions Chamber on Heads - Why?

Print Thread

Re: Wire/Groove Around Combustions Chamber on Heads - Why? [Re: Jeremiah] #2397042 11/01/17 11:01 PM 11/01/17 11:01 PM
Joined: Dec 2007 Posts: 12,592 Great Neck,LI,new york hemi-itis I Live Here
hemi-itis I Live Here Joined: Dec 2007 Posts: 12,592 Great Neck,LI,new york	I recently put a set of aluminum heads on that had the groove installed.Removed the rings,tigged the grooves and milled the head back to it was and a tad to clean it up. HEMI-ITIS has no cure. My condition is fully BLOWN!!

Entire Thread
Subject	Posted By	Posted
Wire/Groove Around Combustions Chamber on Heads - Why?	Jeremiah	11/01/17 04:01 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	80fbody	11/01/17 04:12 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	an8sec70cuda	11/01/17 04:19 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	Clanton	11/01/17 05:11 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	RapidRobert	11/01/17 06:44 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	an8sec70cuda	11/02/17 06:55 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	Cab_Burge	11/02/17 07:06 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	RapidRobert	11/04/17 03:58 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	Cab_Burge	11/04/17 07:13 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	RapidRobert	11/06/17 05:16 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	Medlock51	11/01/17 07:00 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	RapidRobert	11/01/17 07:06 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	Jeremiah	11/01/17 08:00 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	Cab_Burge	11/01/17 11:41 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	GY3	11/02/17 01:00 AM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	RapidRobert	11/02/17 02:24 AM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	hemi-itis	11/02/17 03:01 AM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	sgcuda	11/02/17 03:23 AM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	dvw	11/02/17 11:20 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	dthemi	11/04/17 03:34 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	dthemi	11/04/17 04:29 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	jwb123	11/06/17 06:28 PM
Re: Wire/Groove Around Combustions Chamber on Heads - Why?	jughed	11/07/17 12:12 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To