I used the measurements off the #1 intake lifter @ .050 before and after max lift to get the center-line.
So... it's advanced 2 deg from what the can card recommended.
I measured and have 106 deg intake center-line after advancing the crank sprocket 8 deg, the cam card calls for 108..
and the intake opening at .050 on the lifter is now at 26 deg, the cam card is 24 deg.. so the math jives between the two measurements... 2 deg.

So the two measurements tell me I advanced the cam 2 deg from what Comp recommends.... right ?
from 108 center-line to 106 center-line

Which what I understand, 104-106 is what the guys on the board would like to see

I used the intake , the second lifter from the front on the drivers side