I know it's been asked before about putting a 6.1 cam in a 5.7,I've asked myself.What is the general consensus as to what degree of advance it should be installed at? I've read 4,6 and 8 degrees,guessing it differs to application.Mine will be in an ,04 Durango and in an otherwise stock engine.I started to gather parts to rebuild my blown up 5.7 in my Durango,but found a new Mopar long block that had a 6.1 cam installed,but with the OE chain.I plan on using a Crower or Comp Cams adjustable set to be able to degree the cam.
Thanks for any advice~RT