80 or 130? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 80 or 130?

Print Thread

Re: 80 or 130? [Re: mickm] #2243973 01/30/17 03:05 PM 01/30/17 03:05 PM
Joined: Dec 2003 Posts: 4,952 northwest USA N NANKET master
NANKET master N Joined: Dec 2003 Posts: 4,952 northwest USA	These are the bolts and nuts the go through the spindle and lower ball joint, not the tapered stud of the ball joint. Different thickness of the 3 parts joining together is the deal here. Make sure no dirt or grease between all mating surfaces and tighter is better with lubed threads.

Entire Thread
Subject	Posted By	Posted
80 or 130?	mickm	01/30/17 06:07 PM
Re: 80 or 130?	L.R Helbling	01/30/17 06:13 PM
Re: 80 or 130?	feets	01/30/17 06:49 PM
Re: 80 or 130?	mickm	01/30/17 06:49 PM
Re: 80 or 130?	feets	01/30/17 06:55 PM
Re: 80 or 130?	NANKET	01/30/17 07:05 PM
Re: 80 or 130?	feets	01/30/17 07:14 PM
Re: 80 or 130?	L.R Helbling	01/30/17 07:30 PM
Re: 80 or 130?	feets	01/30/17 07:38 PM
Re: 80 or 130?	L.R Helbling	01/30/17 08:28 PM
Re: 80 or 130?	RapidRobert	01/31/17 12:11 AM
Re: 80 or 130?	OzHemi	01/31/17 12:40 AM
Re: 80 or 130?	70Duster	01/31/17 12:49 AM
Re: 80 or 130?	John_Kunkel	01/31/17 01:16 AM
Re: 80 or 130?	Polarapete	01/31/17 01:22 AM
Re: 80 or 130?	mickm	01/31/17 02:31 AM
Re: 80 or 130?	RapidRobert	01/31/17 03:21 AM
Re: 80 or 130?	L.R Helbling	01/31/17 03:48 AM
Re: 80 or 130?	Jjs72D	01/31/17 03:59 AM
Re: 80 or 130?	RapidRobert	01/31/17 04:04 AM
Re: 80 or 130?	poorboy	01/31/17 07:06 AM
Re: 80 or 130?	70Cuda383	01/31/17 02:37 PM
Re: 80 or 130?	RapidRobert	02/01/17 07:12 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1