Looks like the cooler lines have been spliced. The upper line on the radiator looks original and goes to the cooler on the driver side of the radiator. The lower line on the radiator goes to the transmission and has been spliced in two places and the one from the cooler connection to the transmission has also been spliced. I don't see a temp sensor on either line. What line is it on and where in the line is it located? I see I can get Dorman replacement lines and one of them has a sensor on it but I would like to see if there is a sensor plug somewhere. I see a harness on the driver side of the transmission and it looks like there are 3 plugs on it. Looks like two of them are capped and a 3rd plugs into a connector but I can't tell where it goes. The speed sensors and the neutral switch have their own harness and they are all plugged in.