Not a bad idea. Not sure if he would do that, but I could always ask. I thought I would be different and try it.

My thought is, with such a big blade uncovering so much area, its always going to be lean unless you run it at 75psi of fuel pressure like a Ron's toilet...but it is kinda neat.

Funny thing is, its pig rich at 2800 on up....Idle was nice and clean until I messed with it. Now that's goofed up and I need to pull it all apart and make sure I got the restrictors for 1-5 in correct.


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk