Grinding or sanding #3 bearing sides?

Print Thread

Re: Grinding or sanding #3 bearing sides? [Re: maximus] #2207768 12/04/16 08:54 PM 12/04/16 08:54 PM
Joined: Oct 2007 Posts: 736 New York R/T1968R/T super stock
R/T1968R/T super stock Joined: Oct 2007 Posts: 736 New York	Ive used wet dry 600 or 1000 grit paper with oil. Make sure the surface is true. never had a problem

Entire Thread
Subject	Posted By	Posted
Grinding or sanding #3 bearing sides?	maximus	12/04/16 09:12 PM
Re: Grinding or sanding #3 bearing sides?	MR_P_BODY	12/04/16 09:29 PM
Re: Grinding or sanding #3 bearing sides?	Cab_Burge	12/06/16 07:09 AM
Re: Grinding or sanding #3 bearing sides?	W5DART66	12/04/16 10:18 PM
Re: Grinding or sanding #3 bearing sides?	R/T1968R/T	12/05/16 12:54 AM
Re: Grinding or sanding #3 bearing sides?	BPE	12/05/16 01:31 AM
Re: Grinding or sanding #3 bearing sides?	maximum entropy	12/05/16 10:27 PM
Re: Grinding or sanding #3 bearing sides?	Al_Alguire	12/05/16 10:34 PM
Re: Grinding or sanding #3 bearing sides?	Anonymous	12/05/16 11:48 PM
Re: Grinding or sanding #3 bearing sides?	polyspheric	12/06/16 03:20 AM
Re: Grinding or sanding #3 bearing sides?	Monte_Smith	12/06/16 04:31 AM
Re: Grinding or sanding #3 bearing sides?	dvw	12/06/16 05:22 AM
Re: Grinding or sanding #3 bearing sides?	dthemi	12/06/16 07:05 AM
Re: Grinding or sanding #3 bearing sides?	FastmOp	12/06/16 07:09 AM

Hop To