Dual EGT Thermocouple Placement

Print Thread

Re: Dual EGT Thermocouple Placement [Re: Monte_Smith] #2179600 10/21/16 07:22 AM 10/21/16 07:22 AM
Joined: Jun 2008 Posts: 10,847 Oakdale CT gdonovan I Live Here
gdonovan I Live Here Joined: Jun 2008 Posts: 10,847 Oakdale CT	Originally Posted By Monte_Smith You can't tune a gas motor, ESPECIALLY at idle with EGTs. Agreed. As someone suggested, you can always weld in 8 bungs and move the sensors about. In theory, in 4 WOT passes you would know which cylinders run lean. "I think its got a hemi"

Entire Thread
Subject	Posted By	Posted
Dual EGT Thermocouple Placement	Cuda_Mike	10/20/16 12:48 AM
Re: Dual EGT Thermocouple Placement	Cab_Burge	10/20/16 04:29 AM
Re: Dual EGT Thermocouple Placement	hemi-itis	10/20/16 08:18 AM
Re: Dual EGT Thermocouple Placement	astjp2	10/20/16 11:48 AM
Re: Dual EGT Thermocouple Placement	gdonovan	10/20/16 12:49 PM
Re: Dual EGT Thermocouple Placement	Bad340fish	10/20/16 03:30 PM
Re: Dual EGT Thermocouple Placement	pittsburghracer	10/20/16 04:13 PM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/20/16 11:42 PM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/21/16 03:18 AM
Re: Dual EGT Thermocouple Placement	Cab_Burge	10/21/16 04:06 AM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/21/16 04:40 AM
Re: Dual EGT Thermocouple Placement	Monte_Smith	10/21/16 04:27 AM
Re: Dual EGT Thermocouple Placement	Bad340fish	10/21/16 05:24 AM
Re: Dual EGT Thermocouple Placement	gdonovan	10/21/16 11:22 AM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/21/16 04:17 PM

Hop To