Dual EGT Thermocouple Placement

Print Thread

Re: Dual EGT Thermocouple Placement [Re: Cuda_Mike] #2179469 10/20/16 11:18 PM 10/20/16 11:18 PM
Joined: Feb 2005 Posts: 720 Indiana C Cuda_Mike OP super stock
Cuda_Mike OP super stock C Joined: Feb 2005 Posts: 720 Indiana	Cab, I just warmed engine up with no load about 1,800 rpm, 7 tubes were about 850 degrees F. but #5 was 999? It's raining outside and I'm home alone so can't really check with a load on it until I drill and install thermocouples...Car has Hooker SC headers so 6,7 & 8 aren't easily accessable for sensors? what would you suggest?

Entire Thread
Subject	Posted By	Posted
Dual EGT Thermocouple Placement	Cuda_Mike	10/20/16 12:48 AM
Re: Dual EGT Thermocouple Placement	Cab_Burge	10/20/16 04:29 AM
Re: Dual EGT Thermocouple Placement	hemi-itis	10/20/16 08:18 AM
Re: Dual EGT Thermocouple Placement	astjp2	10/20/16 11:48 AM
Re: Dual EGT Thermocouple Placement	gdonovan	10/20/16 12:49 PM
Re: Dual EGT Thermocouple Placement	Bad340fish	10/20/16 03:30 PM
Re: Dual EGT Thermocouple Placement	pittsburghracer	10/20/16 04:13 PM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/20/16 11:42 PM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/21/16 03:18 AM
Re: Dual EGT Thermocouple Placement	Cab_Burge	10/21/16 04:06 AM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/21/16 04:40 AM
Re: Dual EGT Thermocouple Placement	Monte_Smith	10/21/16 04:27 AM
Re: Dual EGT Thermocouple Placement	Bad340fish	10/21/16 05:24 AM
Re: Dual EGT Thermocouple Placement	gdonovan	10/21/16 11:22 AM
Re: Dual EGT Thermocouple Placement	Cuda_Mike	10/21/16 04:17 PM

Hop To