Quote:

This may seem dumb but pull some of the adjusing screws out of the rockers and check the balls and see if they are all the same. Thought I had a cam going last summer and started to tear in down at the track and happned to notice the balls on the ends of the adjusting screws were wearing real bad on some of them. I was running Cranes at the time and happened to have some spares with me so I was back up and running for last time trial


Derrick

I will check them for sure.

I recall RAS telling me they replaced some of my adjusters when they rebuilt them. not saying these are the replaced ones or the originals but heck, anything is better than a flat cam. even a doubled feeler cluster muck