Solid roller cam in a magnum block

Print Thread

Re: Solid roller cam in a magnum block [Re: fast68plymouth] #2067544 05/05/16 12:06 AM 05/05/16 12:06 AM
Joined: Nov 2006 Posts: 733 jacksonville,FLORIDA slammedR/T super stock
slammedR/T super stock Joined: Nov 2006 Posts: 733 jacksonville,FLORIDA	My 92 date code 360 magnum block I put into my fathers 1990 ramcharger has the oil feed hole. The 95 date code magnum block I'm currently using for my 410 stroker has the oil feed hole. the stock 2000 date code magnum block I had doesn't have the feed but a machine shop should have no issue drilling the feed hole by using a head gasket as a reference. Last edited by slammedR/T; 05/05/16 12:06 AM. 2000 Dakota R/T, 408 magnum, 727, Indy heads 1000cfm 4150 carb, 93 octane fuel. motor; 10.258 @ 132.78 200 shot; 9.262 @ 144.69 racemagnum

Entire Thread
Subject	Posted By	Posted
Solid roller cam in a magnum block	fast68plymouth	05/04/16 03:13 AM
Re: Solid roller cam in a magnum block	pittsburghracer	05/04/16 03:50 AM
Re: Solid roller cam in a magnum block	Adobedude	05/04/16 04:30 AM
Re: Solid roller cam in a magnum block	B1MAXX	05/04/16 06:23 PM
Re: Solid roller cam in a magnum block	Streetwize	05/04/16 07:15 PM
Re: Solid roller cam in a magnum block	fast68plymouth	05/04/16 07:18 PM
Re: Solid roller cam in a magnum block	BPE	05/04/16 07:20 PM
Re: Solid roller cam in a magnum block	Wedgeman	05/05/16 01:09 AM
Re: Solid roller cam in a magnum block	slammedR/T	05/05/16 02:54 AM
Re: Solid roller cam in a magnum block	DARTH V8Я	05/05/16 03:28 AM
Re: Solid roller cam in a magnum block	slammedR/T	05/05/16 04:06 AM
Re: Solid roller cam in a magnum block	HotRodDave	05/05/16 04:44 AM
Re: Solid roller cam in a magnum block	Wedgeman	05/05/16 04:54 AM

Hop To