Solid roller cam in a magnum block

Print Thread

Re: Solid roller cam in a magnum block [Re: fast68plymouth] #2067490 05/04/16 10:54 PM 05/04/16 10:54 PM
Joined: Nov 2006 Posts: 733 jacksonville,FLORIDA slammedR/T super stock
slammedR/T super stock Joined: Nov 2006 Posts: 733 jacksonville,FLORIDA	Magnum blocks from 92-95 still have the oil feed hole in the deck for LA heads, 96 to 2003 would have to be drilled. MRL lifters will clear no problem in a magnum block I am running them in my 410 magnum stroker. 2000 Dakota R/T, 408 magnum, 727, Indy heads 1000cfm 4150 carb, 93 octane fuel. motor; 10.258 @ 132.78 200 shot; 9.262 @ 144.69 racemagnum

Entire Thread
Subject	Posted By	Posted
Solid roller cam in a magnum block	fast68plymouth	05/04/16 03:13 AM
Re: Solid roller cam in a magnum block	pittsburghracer	05/04/16 03:50 AM
Re: Solid roller cam in a magnum block	Adobedude	05/04/16 04:30 AM
Re: Solid roller cam in a magnum block	B1MAXX	05/04/16 06:23 PM
Re: Solid roller cam in a magnum block	Streetwize	05/04/16 07:15 PM
Re: Solid roller cam in a magnum block	fast68plymouth	05/04/16 07:18 PM
Re: Solid roller cam in a magnum block	BPE	05/04/16 07:20 PM
Re: Solid roller cam in a magnum block	Wedgeman	05/05/16 01:09 AM
Re: Solid roller cam in a magnum block	slammedR/T	05/05/16 02:54 AM
Re: Solid roller cam in a magnum block	DARTH V8Я	05/05/16 03:28 AM
Re: Solid roller cam in a magnum block	slammedR/T	05/05/16 04:06 AM
Re: Solid roller cam in a magnum block	HotRodDave	05/05/16 04:44 AM
Re: Solid roller cam in a magnum block	Wedgeman	05/05/16 04:54 AM

Hop To