Yes, the Voodoo cam mentioned above would work, however the Hughes has more lift with only two more degrees at 50, 0.480 against 0.454.

I looked at the Voodoo cams before I opened the Hughes catalog.
Hughes has been pushing the envelope for how fast you can accelerate a 0.904" lifter. They're on their third cam series and every one has higher lift per duration than the last one.

The Voodoo cam IS ground on a 110 LSA. It's just ground a little advanced. (112 + 108) / 2 = 110. The Hughes is ground, as most Hughes cams are, on a 112LSA. That's why I suggested getting it on a 110LSA and not just buying the shelf cam. Overlap is quite low with those small lobes, so a smaller LSA shouldn't affect the idle much if any.

R