Dana 60 Strange main cap fittment

Print Thread

Re: Dana 60 Strange main cap fittment [Re: dragram440] #2008670 02/09/16 05:19 PM 02/09/16 05:19 PM
Joined: Mar 2006 Posts: 9,883 MI, usa dvw master
dvw master Joined: Mar 2006 Posts: 9,883 MI, usa	Ideally you would like to machine the caps attached to the housing. The bolt holes are off some. This holds the cap in a off center position. Open them slightly and the race should center the cap. Doug

Entire Thread
Subject	Posted By	Posted
Dana 60 Strange main cap fittment	dragram440	02/08/16 10:28 PM
Re: Dana 60 Strange main cap fittment	sgcuda	02/09/16 02:16 AM
Re: Dana 60 Strange main cap fittment	Cab_Burge	02/09/16 05:28 AM
Re: Dana 60 Strange main cap fittment	65coronet500	02/09/16 06:29 AM
Re: Dana 60 Strange main cap fittment	sgcuda	02/09/16 01:48 PM
Re: Dana 60 Strange main cap fittment	dragram440	02/09/16 06:49 PM
Re: Dana 60 Strange main cap fittment	dragram440	02/09/16 07:33 PM
Re: Dana 60 Strange main cap fittment	Cab_Burge	02/09/16 08:51 PM
Re: Dana 60 Strange main cap fittment	dvw	02/09/16 09:19 PM
Re: Dana 60 Strange main cap fittment	Polarapete	02/09/16 10:48 PM
Re: Dana 60 Strange main cap fittment	440lebaron	02/10/16 07:00 PM
Re: Dana 60 Strange main cap fittment	dragram440	02/11/16 12:19 AM
Re: Dana 60 Strange main cap fittment	Leon441	02/11/16 01:11 AM
Re: Dana 60 Strange main cap fittment	dragram440	02/11/16 06:03 PM
Re: Dana 60 Strange main cap fittment	Cab_Burge	02/11/16 06:11 AM
Re: Dana 60 Strange main cap fittment	dragram440	02/11/16 05:59 PM
Re: Dana 60 Strange main cap fittment	Leon441	02/11/16 07:04 PM
Re: Dana 60 Strange main cap fittment	StealthWedge67	02/11/16 06:45 PM

Hop To