Dana 60 Strange main cap fittment

Print Thread

Dana 60 Strange main cap fittment #2008073 02/08/16 06:28 PM 02/08/16 06:28 PM
Joined: Mar 2009 Posts: 1,058 bigfork mn D dragram440 OP super stock
dragram440 OP super stock D Joined: Mar 2009 Posts: 1,058 bigfork mn	I bought a set of Dana 60 strange aluminum main caps and they need to machined to fit. I got them machined to the right spec on the bore but it seems the edge of the new cap and the edge of the case dont line up just perfect. I put the factory caps on an it seemed to fit the same way. Anyone ever seen this be for? 67' charger 499 RB 10.57 at 127

Entire Thread
Subject	Posted By	Posted
Dana 60 Strange main cap fittment	dragram440	02/08/16 10:28 PM
Re: Dana 60 Strange main cap fittment	sgcuda	02/09/16 02:16 AM
Re: Dana 60 Strange main cap fittment	Cab_Burge	02/09/16 05:28 AM
Re: Dana 60 Strange main cap fittment	65coronet500	02/09/16 06:29 AM
Re: Dana 60 Strange main cap fittment	sgcuda	02/09/16 01:48 PM
Re: Dana 60 Strange main cap fittment	dragram440	02/09/16 06:49 PM
Re: Dana 60 Strange main cap fittment	dragram440	02/09/16 07:33 PM
Re: Dana 60 Strange main cap fittment	Cab_Burge	02/09/16 08:51 PM
Re: Dana 60 Strange main cap fittment	dvw	02/09/16 09:19 PM
Re: Dana 60 Strange main cap fittment	Polarapete	02/09/16 10:48 PM
Re: Dana 60 Strange main cap fittment	440lebaron	02/10/16 07:00 PM
Re: Dana 60 Strange main cap fittment	dragram440	02/11/16 12:19 AM
Re: Dana 60 Strange main cap fittment	Leon441	02/11/16 01:11 AM
Re: Dana 60 Strange main cap fittment	dragram440	02/11/16 06:03 PM
Re: Dana 60 Strange main cap fittment	Cab_Burge	02/11/16 06:11 AM
Re: Dana 60 Strange main cap fittment	dragram440	02/11/16 05:59 PM
Re: Dana 60 Strange main cap fittment	Leon441	02/11/16 07:04 PM
Re: Dana 60 Strange main cap fittment	StealthWedge67	02/11/16 06:45 PM

Hop To