You can go the trial and error method...
Using the old pinion depth shim assemble the unit.
Set the backlash to the indicated amount check the match. Move the pinion depth according to the pattern left. Remember to add some type of drag to the pinion while rotating to set the pattern.
'01 P1500, Blown/Inj BAE,/Veney ,Bruno/CS2,Dana 60
'01 Dodge 3500 S Cummins Auto, Fresh air kit, 4" Exhaust,
'05 Dodge Magnum R/T - Too Much to list
'60 Willys CJ5
'01 International LPX - Project,DT466, Allison
'64 Plymouth Valiant, Inj 528 Hemi, 2spd
| 
