You have the idea for most of it.. if you want to
bump up the compression some you can have the heads
cut some.. make sure you do the intake side also.. you
will need push rods for it but you have the idea for the
rest of it.. it will want to turn higher to utilize the
flow with the stock stroke.. no big deal but you would
still need to remember you have stock rods... I ran my
stock stroke 340 with 10.0 compression and it ran fine..
it ran 10.0s at 2600#.. might have gone quicker but I had
to stay at 10.0... at 290cfm thats not bad.. I had 310 out
of mine.. you would like a steeper gear and a conv with a
nice stall.. if you dont get a nice stall it will be a PIG
off the line... just ask question and we can help out...
by the way.. my stock stroke I had Viper rods in it and it
ended up tearing a rod in half.. that was 7600 rpm