Cam timing and piston to valve

Print Thread

Re: Cam timing and piston to valve [Re: sixty9bee] #196413 01/18/09 12:54 PM 01/18/09 12:54 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	If comp cams says 106 on a 110 lobe center cam they install the dowel pin to try and have straight up be at 106 everything being equal. but the crank keyway , gear set and drilling the dowel in the pin is not an exact science With the exhaust being that

Entire Thread
Subject	Posted By	Posted
Cam timing and piston to valve	sixty9bee	01/17/09 11:50 PM
Re: Cam timing and piston to valve	sixty9bee	01/17/09 11:54 PM
Re: Cam timing and piston to valve	SCATPACK 1	01/18/09 12:05 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 12:10 AM
Re: Cam timing and piston to valve	Bigbeep	01/18/09 12:21 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 01:02 AM
Re: Cam timing and piston to valve	lewtot184	01/18/09 02:24 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 12:05 AM
Re: Cam timing and piston to valve	Anonymous	01/18/09 03:06 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 03:28 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 03:47 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:00 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 04:03 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 04:14 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:28 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 05:43 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 04:26 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 04:54 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:01 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:08 PM
Re: Cam timing and piston to valve	Anonymous	01/18/09 05:29 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:31 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:41 PM

Hop To