Cam timing and piston to valve

Print Thread

Re: Cam timing and piston to valve [Re: tjmarcus1] #196403 01/17/09 10:24 PM 01/17/09 10:24 PM
Joined: Jun 2008 Posts: 3,916 usa L lewtot184 master
lewtot184 master L Joined: Jun 2008 Posts: 3,916 usa	going from a 110 installed centerline to 106 will probably only net .015" additional clearance. recheck installed centerline and true rocker ratio. if the centerline is correctly installed and the rocker ratio isn't way off then the pistons will need work.

Entire Thread
Subject	Posted By	Posted
Cam timing and piston to valve	sixty9bee	01/17/09 11:50 PM
Re: Cam timing and piston to valve	sixty9bee	01/17/09 11:54 PM
Re: Cam timing and piston to valve	SCATPACK 1	01/18/09 12:05 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 12:10 AM
Re: Cam timing and piston to valve	Bigbeep	01/18/09 12:21 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 01:02 AM
Re: Cam timing and piston to valve	lewtot184	01/18/09 02:24 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 12:05 AM
Re: Cam timing and piston to valve	Anonymous	01/18/09 03:06 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 03:28 AM
Re: Cam timing and piston to valve	tjmarcus1	01/18/09 03:47 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:00 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 04:03 AM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 04:14 AM
Re: Cam timing and piston to valve	MR_P_BODY	01/18/09 04:28 AM
Re: Cam timing and piston to valve	Sport440	01/18/09 05:43 AM
Re: Cam timing and piston to valve	440Jim	01/18/09 04:26 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 04:54 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:01 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:08 PM
Re: Cam timing and piston to valve	Anonymous	01/18/09 05:29 PM
Re: Cam timing and piston to valve	Dodgem	01/18/09 05:31 PM
Re: Cam timing and piston to valve	sixty9bee	01/18/09 05:41 PM

Hop To