Originally Posted By AndyF
Exhaust pattern looks weird in that picture and why would Edelbrock put a stock rocker shaft setup on an expensive race head? They should only sell the serious heads with pads for Jesel or T&D rocker arms. Wonder if the same guy who screwed up their Victor BB head designed this SB head?


Actually uses a Hughes specific BB Mopar offset rocker. Eddie gave me the PN. They simply said buy it from Hughes.

So milling the stands and pads is required to run a Jesel or T&D setup. I'm on the fence. Dump my R3 and go Ritter/P7 or keep what I got and dive in on these heads. It is ridiculous to think I can buy a Ritter block and GOOD P7's for less than these heads!!

Last edited by CJD AUTOMOTIVE; 09/25/15 05:43 PM.

Craig Scholl
CJD Automotive, LLC
Jacksonville, FL
www.CJDAUTOMOTIVE.com
904-400-1802

"I own a Mopar. I already know it won't be in stock, won't ship tomorrow, and won't fit without modification"