383 head gaskets.............

Print Thread

Re: 383 head gaskets............. [Re: 4BBodies] #184483 01/05/09 01:43 PM 01/05/09 01:43 PM
Joined: Mar 2003 Posts: 4,389 Kenmore, New York InViolent master
InViolent master Joined: Mar 2003 Posts: 4,389 Kenmore, New York	I would go with Fel-Pro head gaskets and skip the steel shims. You'll get a better seal, and you'll only see a 3 or 4% difference in compression ratio. Mancini Racing sells the steel shim gaskets if you are so inclined. Or check Summit or Jegs.

Entire Thread
Subject	Posted By	Posted
383 head gaskets.............	4BBodies	01/05/09 05:23 PM
Re: 383 head gaskets.............	InViolent	01/05/09 05:43 PM
Re: 383 head gaskets.............	DAMOPARS	01/05/09 06:15 PM
Re: 383 head gaskets.............	4BBodies	01/05/09 07:17 PM
Re: 383 head gaskets.............	62maxwgn	01/06/09 01:32 PM
Re: 383 head gaskets.............	BRawls	01/06/09 01:47 AM
Re: 383 head gaskets.............	383man	01/06/09 02:05 AM
Re: 383 head gaskets.............	StealthWedge67	01/06/09 04:56 AM
Re: 383 head gaskets.............	superwrench	01/06/09 05:25 AM
Re: 383 head gaskets.............	dave571	01/06/09 05:50 AM
Re: 383 head gaskets.............	RapidRobert	01/06/09 06:37 AM
Re: 383 head gaskets.............	Runner	01/06/09 12:35 PM
Re: 383 head gaskets.............	dave571	01/09/09 07:31 AM
Re: 383 head gaskets.............	RapidRobert	01/06/09 05:26 AM
Re: 383 head gaskets.............	Junky	01/06/09 03:02 PM
Re: 383 head gaskets.............	InViolent	01/06/09 03:51 PM
Re: 383 head gaskets.............	4BBodies	01/06/09 05:35 PM
Re: 383 head gaskets.............	ademon	01/06/09 06:30 PM
Re: 383 head gaskets.............	74fldart	01/06/09 06:39 PM
Re: 383 head gaskets.............	Rug_Trucker	01/09/09 02:02 PM
Re: 383 head gaskets.............	75RoadRunner	01/19/09 01:33 AM
Re: 383 head gaskets.............	JohnRR	01/19/09 03:50 AM
Re: 383 head gaskets.............	ngpSatellite	01/09/09 02:37 PM
Re: 383 head gaskets.............	farmington	01/09/09 03:23 PM
Re: 383 head gaskets.............	JohnRR	01/09/09 04:21 PM
Re: 383 head gaskets.............	RapidRobert	01/09/09 04:31 PM
Re: 383 head gaskets.............	AndyF	01/09/09 05:35 PM
Re: 383 head gaskets.............	JohnRR	01/09/09 05:47 PM
Re: 383 head gaskets.............	RapidRobert	01/09/09 07:24 PM
Re: 383 head gaskets.............	Anonymous	01/10/09 03:50 AM
Re: 383 head gaskets.............	4BBodies	01/18/09 09:10 PM
Re: 383 head gaskets.............	fastmark	01/18/09 09:27 PM
Re: 383 head gaskets.............	NTOLERANCE	01/19/09 01:17 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To