Originally Posted By John_Kunkel
Originally Posted By 383man
This page says that the relay which controls the solenoid locks and unlocks the conveter. Ron


I know it's just semantics but, with no power on the solenoid, it locks up...power unlocks it so one (not me) could say that the solenoid locks and unlocks the clutch but in a passive way on the lock and active way on the unlock.




John when I look at the flow charts from my book it says the solenoid is deenergized with lock-up off (venting) and energized (not venting) is when it locks-up which is when the PCM grounds the relay and sends the 12 volts to the solenoid. Ron

Last edited by 383man; 04/17/15 10:43 PM.