Digging up all the pics I have from when I did this on my BB. My 440 Source covers had NO baffle provisions so I made galvanized sheet metal full length baffles and drilled 2 holes with bolts and silicone to seal them. Made 3/8" tall tube stand-offs between sheet metal and VC's to set there distance. Problem solved on baffling, your results may vary depending on what you try.



You can see it but the PCV goes through an oil separator mounted on firewall and then to carb. The breathers Tee then go under intake to the breather filter tank at rear of inner fender.


Mopar to the bone!!!