Got the adjuster done. I used a pry bar to get the adjuster up and got the block half slid in. I then used to jack to massage it up and got a screwdriver under it. The a hammer whack got it over to the other side!

Now I have another issue. I have these Bilsteins that I am trying to put on and they are much fatter than the KYG G2 shocks I pulled off. So fat, in fact, that I cannot seem to find a way to get them in without pulling off the UCA and the plate in mounts to. WTH. I wish I had known about this before I got them. I tried to compress them and everything but I can't seem to get them in as they wedge on the LCA and the opening in the K-frame. Ugh.