SB 3.79" or 4.00" crank? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech SB 3.79" or 4.00" crank?

Print Thread

Re: SB 3.79" or 4.00" crank? [Re: justinp61] #1799275 04/09/15 11:50 AM 04/09/15 11:50 AM
Joined: Feb 2003 Posts: 3,456 Out West 4 408strokerdart master
408strokerdart master 4 Joined: Feb 2003 Posts: 3,456 Out West	I like the 3.79" stroke if you have limited deck height, but there is little substitute for cid on a naturally aspirated engine. If it is a tall deck application I would go 4" crank all day long.

Entire Thread
Subject	Posted By	Posted
SB 3.79" or 4.00" crank?	justinp61	04/08/15 03:09 AM
Re: SB 3.79" or 4.00" crank?	SpareParts	04/08/15 03:33 AM
Re: SB 3.79" or 4.00" crank?	justinp61	04/08/15 03:54 AM
Re: SB 3.79" or 4.00" crank?	Hot 340	04/08/15 03:35 AM
Re: SB 3.79" or 4.00" crank?	J_BODY	04/08/15 03:47 AM
Re: SB 3.79" or 4.00" crank?	SpareParts	04/08/15 06:47 AM
Re: SB 3.79" or 4.00" crank?	D-50	04/09/15 12:11 AM
Re: SB 3.79" or 4.00" crank?	justinp61	04/09/15 04:21 AM
Re: SB 3.79" or 4.00" crank?	MR_P_BODY	04/09/15 04:44 AM
Re: SB 3.79" or 4.00" crank?	Streetwize	04/09/15 03:44 PM
Re: SB 3.79" or 4.00" crank?	408strokerdart	04/09/15 03:50 PM
Re: SB 3.79" or 4.00" crank?	justinp61	04/09/15 04:25 PM
Re: SB 3.79" or 4.00" crank?	dogdays	04/09/15 08:31 PM
Re: SB 3.79" or 4.00" crank?	dizuster	04/09/15 08:55 PM
Re: SB 3.79" or 4.00" crank?	Streetwize	04/09/15 09:39 PM
Re: SB 3.79" or 4.00" crank?	Streetwize	04/09/15 09:40 PM
Re: SB 3.79" or 4.00" crank?	justinp61	04/09/15 11:21 PM
Re: SB 3.79" or 4.00" crank?	littleVAL	04/11/15 11:26 PM
Re: SB 3.79" or 4.00" crank?	justinp61	04/11/15 11:58 PM
Re: SB 3.79" or 4.00" crank?	littleVAL	04/12/15 12:43 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1