Quote:

Quote:

Not trying to troll you here but I don't think you would have had the clearance issue if you were running Harland Sharp rockers. They don't have a gentle radius like the Hughes pieces. They cost literally 2X + as much though



Not trolling at all. I was going to go T&D or Jesel on one of my identical 511" short blocks so that will be next. I was also going to do another set of Victors but am pretty interested in either -1's or something comparable. I'd like to see some detail shots of the HS offset rockers for the Victors if anyone has any. I was not super impressed with the fit and finish of the Hughes rockers but figured I'd see how they work out. I am also going to replace the adjusters with some Smith Brothers stuff. Should have just bought the T&D's at this point. We shall see how it works out.



I don't have any pics myself, but the ones HS has on their website look to have the exact same profile as the standard offset rockers they sell. I had a similar issue with rockers I was going to try to run on my build and ended up going to the HS rockers Mancini sells.

I was actually pretty annoyed too because I already had the first pair of rockers and if I knew I was going to have to buy rockers I'd have bought Victors since the offset Hughes rockers are the same price. Looks like in the end I dodged a bullet there.

Now I need to pin those needles, got to feel that heat
Hear my motor screamin while I'm tearin up the street