too much cam? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer too much cam?

Print Thread

Re: too much cam? [Re: dogdays] #1744864 02/14/15 07:12 PM 02/14/15 07:12 PM
Joined: Apr 2006 Posts: 26 atlanta D dvanecek OP member
dvanecek OP member D Joined: Apr 2006 Posts: 26 atlanta	Quote: That's the cam everyone sells for every engine. Edelbrock sells it as the Performer cam. If you can swing it, I'd steer you to the Lunati Voodoo line, the smallest one. Back when Comp had a Magnum cam for the 318, it was 204/204, 0.425 lift, LSA 110. That one or one like it should work better. R. I think I'm gonna save up for that Lunati. Looks it's gonna give good torque and a smooth powerband. What do you think about the TQ?

Entire Thread
Subject	Posted By	Posted
too much cam?	dvanecek	02/02/15 05:45 PM
Re: too much cam?	RapidRobert	02/02/15 07:15 PM
Re: too much cam?	dogdays	02/02/15 09:15 PM
Re: too much cam?	dvanecek	02/02/15 09:40 PM
Re: too much cam?	dvanecek	02/03/15 03:04 AM
Re: too much cam?	D_C	02/03/15 05:25 AM
Re: too much cam?	dvanecek	02/12/15 04:35 PM
Re: too much cam?	dogdays	02/14/15 12:55 AM
Re: too much cam?	dvanecek	02/14/15 11:12 PM
Re: too much cam?	DaveRS23	02/03/15 03:48 PM
Re: too much cam?	mod5v	02/05/15 07:57 PM
Re: too much cam?	Supercuda	02/05/15 10:46 PM
Re: too much cam?	volaredon	02/06/15 02:04 AM
Re: too much cam?	dogdays	02/06/15 05:38 PM
Re: too much cam?	dvanecek	02/07/15 04:41 AM
Re: too much cam?	Baxter61	02/07/15 04:44 AM
Re: too much cam?	dvanecek	02/07/15 05:14 AM
Re: too much cam?	Dean_Kuzluzski	02/07/15 11:49 AM
Re: too much cam?	RapidRobert	02/07/15 04:28 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1