Quote: UNI filter worked well with our cowl hood on our W5 mill.... unfortunately this set up came in at .75" too high, so the 4150 carb is on for the time being. I never ran a filter on the Mirada. Dang top of the carb was up in the Dart Sport hood scoop I was running.... no room.
....and yes, these are basically "bug and rock" catchers imho, kind of like the K&N filters I see in so many diesel trucks.... with blowby.
Wanna sell it by chance? If not cool and I really need to either make something like this or make one like Mike said that fits the entrance and leaves the carb open. I also wonder about the different shapes and locations and it`s affects on air flow w/these different designs(Uni)type being that there`s a wall if you will around the carb instead of air flowing over and through like the standard round types..............
72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....
I also wonder about the different shapes and locations and it`s affects on air flow w/these different designs(Uni)type being that there`s a wall if you will around the carb instead of air flowing over and through like the standard round types.............. 
