426 Hemi Minimum Valve Clearances

Print Thread

Re: 426 Hemi Minimum Valve Clearances [Re: SSAAHemiFan] #1706780 12/06/14 05:50 PM 12/06/14 05:50 PM
Joined: Jan 2003 Posts: 2,431 USA S SSAAHemiFan OP top fuel
SSAAHemiFan OP top fuel S Joined: Jan 2003 Posts: 2,431 USA	I found this today (Edelbrock Hemi Victor Instructions) "Valve-to-bore clearance should also be checked, and the top of the bore notched for clearance, if necessary (Min Clearance 0.030�)

Entire Thread
Subject	Posted By	Posted
426 Hemi Minimum Valve Clearances	SSAAHemiFan	12/05/14 08:08 AM
Re: 426 Hemi Minimum Valve Clearances	cedarmachine	12/05/14 11:57 AM
Re: 426 Hemi Minimum Valve Clearances	rickseeman	12/05/14 06:28 PM
Re: 426 Hemi Minimum Valve Clearances	Cab_Burge	12/05/14 09:01 PM
Re: 426 Hemi Minimum Valve Clearances	SSAAHemiFan	12/06/14 08:48 AM
Re: 426 Hemi Minimum Valve Clearances	SSAAHemiFan	12/06/14 09:50 PM
Re: 426 Hemi Minimum Valve Clearances	Cab_Burge	12/06/14 10:22 PM
Re: 426 Hemi Minimum Valve Clearances	SSAAHemiFan	12/07/14 03:58 AM
Re: 426 Hemi Minimum Valve Clearances	rickseeman	12/07/14 09:57 PM

Hop To