Quote:

Your pretty dense. The builder is the same guy that did the redesign and cnc programing. If he can't get something as silly as the oil port right

I bet if you ask him he has a good reason to make the port larger. Just like the other aftermarket blocks. This is not a stock replacement block. Not even close.

Quote:

then what else can't he get right.

So you are saying that because the oil pressure port is not stock size that there must be a whole bunch of things wrong that render the block unusable? You seem to be obsessed with the fact that you had to go to the nearest auto parts store and buy a fitting. Is Autozone 200 miles away? Did they charge you $500 for the thing?

Quote:

He is a Ford man. And when the owner of these blocks tells me that I don't need a windage tray because of the superior ring packs that they use, then THEY JUST DON"T GET IT.

Then how come the aluminum pans that he sells come with a built in tray?

Last edited by GomangoCuda; 12/03/14 02:43 PM.
In theory, there is no difference between theory and practice. In practice, there is.