Quote:

Quote:

In reality, 720-780HP, 500+ lb-ft from 3500 rpm to 7500 rpm on 91-93 octane with Edelbrock RPM heads, Indy single plane and a single 1100cfm Dominator.




Id like to stick with the crossram for obvious reasons!! Id love some carb and head recommendations for the motor at 600hp..




As to carburetors, I've no experience with duals and those manifolds so silence is my best option.

Cylinder heads only need to be any iron or aluminum head that will get you 285cfm @ .500" lift and 295cfm @ .600" lift. So that would be any ported 902, 906, 915, 213, 346, 452 or a service prepped RPM or Stealth.