Im building this



Waste Oil Heater Plans

Transform a 55 gallon drum & 100# propane tank into Free Heat from a Zero Smoke Waste Oil Heater you can build in about 2 weeks.



* NO PANS TO CLEAN OUT
* NO FILTERS TO CHANGE



* NO FUEL NOZZLES TO PLUG
* NO EXPENSIVE PARTS OR MAINTENANCE



How is this heater different than other waste oil heaters?

Most waste oil heaters on the market today are engineered to be either a Spray Gun type or a Pot Burner. Pot burners are just what they sound like. It's basically an oil fire contained within a pan or pot. These are very dirty devices and create lots of soot and smoke. Spray gun types are a more efficient design because atomizing the fuel before igniting it results in a much cleaner burn and more heat output. The problem is the high pressure fuel pumps and tiny fuel spray nozzles that plug up due to the particles and contaminants present in waste oils. Our heater atomizes the fuel before igniting it but does not use a high pressure pump or fuel nozzle, there is nothing to plug up and the design eleminates the need for expensive filter changes.

· Heating Capacity:
70,000 Btu’s - 200,000 Btu’s (with adjustable fuel feed)

· Fuel Consumption:
0.6 to 2 gallons per hour

· Fuels:

-Waste Motor Oil
-Waste Vegetable Oil
-Transmission and Hydraulic Oils
-Mineral Spirits
-Machine Cutting Oils
-Synthetic Oils
-Gear Oils.
-BioDiesel or Fuel Oil at any ratio together or separately.

· Dimensions:
30” Diameter x 68" Tall + Fuel Tank of your choice.

· Weight:
~250 Lbs. (Without Fuel Tank).

· Electrical:
110 VAC / 15 Amp Circuit.

· Compressed Air:
Less than 0.5 CFM @ 80psi

· Controls:
Manual Ignition and Shutdown

· Construction:
Commonly available materials