Quote:

My car has the very same Front and Rear Dr Diff brake package. Car is a '68 Barracuda. Front is 255/40-18 on 18x9 with a +35mm offset. This is a fitment for a 2005-2014 Mustang. Wheels cost me $150 each from "Late Model Restoration". http://www.latemodelrestoration.com/item/SVE-1007FC/2005-12-Mustang-Flat-Black-SVE-Drift-18X9


Rear I am running 295/40-18 on 18x10 with +22mm offset. This is a fitment for a 1994-2004 Mustang and cost $160 each. I am running a 1/2" spacer, but my axle is narrowed 7/8" per side from stock. These wheels would fit perfectly on my car with the stock axle width. My axle is narrowed to fit a 12" +25mm offset wheel in the center of the wheel well. The inner wheel housing is flush to the frame AKA mini-tub. So I can run 15x10 1" offset and fit 325/50-15 under the car. Likewise I can run 19x12 and a 325/30-19.
http://www.latemodelrestoration.com/item/SVE-1007FA/1994-04-Mustang-Flat-Black-SVE-Drift-18X10

Only issue with the front on the SVE wheels is I will not be able to run the plastic wheel center caps or I will have to make something special that will fit over the grease cap.

Here is a decent set of pictures showing how the wheels sit:
http://www.forabodiesonly.com/mopar/showpost.php?p=1970389961&postcount=233

Modifications to clearance front edge of front fender on the Barracuda:
https://board.moparts.org/ubbthreads/show...rue#Post8094659

Pictures the day it came home from paint:
http://www.forabodiesonly.com/mopar/showpost.php?p=1970471762&postcount=296

Here is an older picture with the 15x10 and 325/50 Drag radials:
http://www.forabodiesonly.com/mopar/showpost.php?p=1326615&postcount=20


-Michael



Ok, I've seen your car quite a bit on FABO. This is a good reference for me.