Quote:
Quote:
I apoligize for affending so many people by asking who races a stroker RB in a stock block.....I had no idea so many people would get so upset about racing a stroker motor with a stock block....I was just looking for relavent info on anybody who had run one and who's kit they used and what issues they encountered. I will probably still go my way if money allows. From our end we see no issue with it as it is only 1/8th more stroke in either direction than we run now.
And I will mention this about after market blocks that many on here say are the best thing since sliced bread....There are all kinds of issues with those as well. At least with a factory block, I know it will assemble well if all the parts I purchased are good. Aftermarket block not so much, and then you have to start those uncomfortable discussions with them so you can get it fixed....Like who pays for it, who fixes it, who pays for shipping etc...
Randy, I wasn't offended. I was just offering my opinion, FWIW.
Actually I wasn't refering to your post, but there were two other threads started and they weren't real pretty. I run two cars and the race car gets theleft over per say...My street car has a brand new block in it, and I will tell you I was not real happy with the mfgr's response when we had a problem with it, so we fixed it oursevles.
Either way, we have a race program and other than a cam failure and some rockers arms, we have had some very good seasons with our 512.....I figured for a spare, we would build it the same, and go for the bigger one....Seems to work.
| 
