Quote:

---

I apoligize for affending so many people by asking who races a stroker RB in a stock block.....I had no idea so many people would get so upset about racing a stroker motor with a stock block....I was just looking for relavent info on anybody who had run one and who's kit they used and what issues they encountered. I will probably still go my way if money allows. From our end we see no issue with it as it is only 1/8th more stroke in either direction than we run now.

And I will mention this about after market blocks that many on here say are the best thing since sliced bread....There are all kinds of issues with those as well. At least with a factory block, I know it will assemble well if all the parts I purchased are good. Aftermarket block not so much, and then you have to start those uncomfortable discussions with them so you can get it fixed....Like who pays for it, who fixes it, who pays for shipping etc...

---

Although I`m only at 470 cubes, I spin the snot out of my 400 low deck and have been for 13+ years and at my last and 3rd freshen up, Jason Pettis commented on how little cap walk I had even compared to some "better" blocks............I was shocked and I know cap walk is only one concern but it was refreshing to say the least.