Boring a 273 Block to a 340 Block

Print Thread

Re: Boring a 273 Block to a 340 Block [Re: dogdays] #1666025 09/03/14 08:35 PM 09/03/14 08:35 PM
Joined: Jan 2003 Posts: 1,804 McGregor,Iowa 52157 5 500ciDuster top fuel
500ciDuster top fuel 5 Joined: Jan 2003 Posts: 1,804 McGregor,Iowa 52157	I used to think that all the 273's had forged cranks & adjustable rockers so I kept one out of a 67 barracuda for years when I was scraping decided to pull the crank which ended up being cast & it had a hydraulic cam w/non-adjustables

Entire Thread
Subject	Posted By	Posted
Boring a 273 Block to a 340 Block	MuuMuu101	09/01/14 04:35 AM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/01/14 04:38 AM
Re: Boring a 273 Block to a 340 Block	barracuda man	09/01/14 04:45 AM
Re: Boring a 273 Block to a 340 Block	MuuMuu101	09/01/14 04:47 AM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/01/14 04:56 AM
Re: Boring a 273 Block to a 340 Block	Just-a-dart	09/01/14 06:25 AM
Re: Boring a 273 Block to a 340 Block	Copper Dart	09/01/14 01:57 PM
Re: Boring a 273 Block to a 340 Block	G_bob	09/01/14 03:59 PM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/01/14 05:37 PM
Re: Boring a 273 Block to a 340 Block	MuuMuu101	09/01/14 06:50 PM
Re: Boring a 273 Block to a 340 Block	barracuda man	09/01/14 09:25 PM
Re: Boring a 273 Block to a 340 Block	Just-a-dart	09/01/14 10:44 PM
Re: Boring a 273 Block to a 340 Block	J_BODY	09/01/14 11:22 PM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/01/14 11:32 PM
Re: Boring a 273 Block to a 340 Block	J_BODY	09/01/14 11:36 PM
Re: Boring a 273 Block to a 340 Block	HotRodDave	09/02/14 12:50 AM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/02/14 01:00 AM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/02/14 01:15 AM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/02/14 01:55 AM
Re: Boring a 273 Block to a 340 Block	AlexP	09/03/14 01:12 AM
Re: Boring a 273 Block to a 340 Block	dogdays	09/03/14 06:55 PM
Re: Boring a 273 Block to a 340 Block	500ciDuster	09/04/14 12:35 AM
Re: Boring a 273 Block to a 340 Block	MuuMuu101	09/04/14 04:43 AM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/01/14 05:46 PM
Re: Boring a 273 Block to a 340 Block	HotRodDave	09/01/14 06:41 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To