Boring a 273 Block to a 340 Block

Print Thread

Re: Boring a 273 Block to a 340 Block [Re: MR_P_BODY] #1666005 09/01/14 12:47 AM 09/01/14 12:47 AM
Joined: Dec 2010 Posts: 12,375 SoCal MuuMuu101 OP I got lucky at Woodward!
MuuMuu101 OP I got lucky at Woodward! Joined: Dec 2010 Posts: 12,375 SoCal	Quote: Only due to the cyl walls not being thick enough So the 340 block has a little more "meat" built into it? Are they the same size, physically, on the outside?

Entire Thread
Subject	Posted By	Posted
Boring a 273 Block to a 340 Block	MuuMuu101	09/01/14 04:35 AM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/01/14 04:38 AM
Re: Boring a 273 Block to a 340 Block	barracuda man	09/01/14 04:45 AM
Re: Boring a 273 Block to a 340 Block	MuuMuu101	09/01/14 04:47 AM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/01/14 04:56 AM
Re: Boring a 273 Block to a 340 Block	Just-a-dart	09/01/14 06:25 AM
Re: Boring a 273 Block to a 340 Block	Copper Dart	09/01/14 01:57 PM
Re: Boring a 273 Block to a 340 Block	G_bob	09/01/14 03:59 PM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/01/14 05:37 PM
Re: Boring a 273 Block to a 340 Block	MuuMuu101	09/01/14 06:50 PM
Re: Boring a 273 Block to a 340 Block	barracuda man	09/01/14 09:25 PM
Re: Boring a 273 Block to a 340 Block	Just-a-dart	09/01/14 10:44 PM
Re: Boring a 273 Block to a 340 Block	J_BODY	09/01/14 11:22 PM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/01/14 11:32 PM
Re: Boring a 273 Block to a 340 Block	J_BODY	09/01/14 11:36 PM
Re: Boring a 273 Block to a 340 Block	HotRodDave	09/02/14 12:50 AM
Re: Boring a 273 Block to a 340 Block	MR_P_BODY	09/02/14 01:00 AM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/02/14 01:15 AM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/02/14 01:55 AM
Re: Boring a 273 Block to a 340 Block	AlexP	09/03/14 01:12 AM
Re: Boring a 273 Block to a 340 Block	dogdays	09/03/14 06:55 PM
Re: Boring a 273 Block to a 340 Block	500ciDuster	09/04/14 12:35 AM
Re: Boring a 273 Block to a 340 Block	MuuMuu101	09/04/14 04:43 AM
Re: Boring a 273 Block to a 340 Block	HYPER8oSoNic	09/01/14 05:46 PM
Re: Boring a 273 Block to a 340 Block	HotRodDave	09/01/14 06:41 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To