I am running a P-S-T fast ratio pitman and idler arms on my 74 Cuda...just recently switched over to power steering.

The Pitman arm seems to be half a spline off. If you center the steering wheel and attach the pitman arm to the box, the wheels are not centered. In order to point the wheels straight, the steering wheel needs to be turned 30 degrees one way or the other.

The alignment was done last year with the manual steering and I have not touched it. At that time the steering wheel was straight and the wheels pointed straight.

With the manual steering, the tie rods were very close to equal length.

In order to get the wheels to point straight with the power box, the tie rods would need to be unequal lengths.

Anyone else have this problem. Is there a problem having unequal length tie rods??

Thanks,

Jason