Quote:
After it stalls if I pull the linkage back there is no pump shot, but if i fill the bowl with a syringe and then pull the linkage it does give a shot.
If it runs OK after you prime it then that points to an evap issue but 2 weeks (or less) doesn't seem like a long time but I cant say for sure on that. It's hot here but I dont run E10 as luckily we still have a choice here. You might see if the AP squirts good shots right when you shut it down then next time you come out see if it still squirts good before you even turn the key. If it is full when you shut it down then not full when you come back days later that would isolate it to an evap issue without you having to do any other testing procedures. Holler how it turns out
live every 24 hour block of time like it's your last day on earth
| 
