On my 92, that I had in 93, so the truck was nearly new, it also had the "Dodge lean" I was going to lower the front a little, I cut one full coil from the left side, and 1 and 1/2 from the right.
Took me a while to figure out what I needed to do, at first I just swapped springs from side to side, still leaned left.
So I cut another 1/2 coil from the right, and viola, sat level, and stayed that way. Also de arched the rear springs.
![](/ubbthreads/images/graemlins/shruggy.gif)
Several years later, ran into the then current owner, he was using it for a used furniture biz, pulling a trailer.
Said he liked the truck, but some body had lowered it, and he wished they hadn't. So I told him I did it.
It was still sitting level tho, just at this height.
Sorry for the bad pic.