6 pak manifold - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 6 pak manifold

Print Thread

Re: 6 pak manifold [Re: Ari440] #1647485 07/30/14 01:18 AM 07/30/14 01:18 AM
Joined: Jul 2008 Posts: 240 Plano, Texas 6 68cuda440 enthusiast
68cuda440 enthusiast 6 Joined: Jul 2008 Posts: 240 Plano, Texas	Quote: by much ? weaind made more torque how many cubic inches is your motor ? 446ci The Weiand runner length is optimized for the 440, it was specifically designed with the 440 in mind. A bigger engine would have the torque peak at a lower RPM with that runner length. A bigger engine may like the mod man intake better and you could run it with max wedge port sizes. -Michael 8224052-P3690982testfit.jpg (159 downloads) Michael 1968 Barracuda Notchback Coupe 440 EFI 6-pack, T56 Magnum 6-spd

Entire Thread
Subject	Posted By	Posted
6 pak manifold	smracing	07/17/14 05:46 AM
Re: 6 pak manifold	sixpackgut	07/17/14 06:12 AM
Re: 6 pak manifold	70AARcuda	07/17/14 06:30 AM
Re: 6 pak manifold	LSP	07/17/14 11:52 AM
Re: 6 pak manifold	smracing	07/17/14 04:24 PM
Re: 6 pak manifold	Cab_Burge	07/17/14 06:32 PM
Re: 6 pak manifold	ProStDodge	07/19/14 05:20 AM
Re: 6 pak manifold	Mr.Yuck	07/19/14 03:13 PM
Re: 6 pak manifold	68cuda440	07/30/14 04:15 AM
Re: 6 pak manifold	Ari440	07/30/14 04:20 AM
Re: 6 pak manifold	Ari440	07/30/14 04:21 AM
Re: 6 pak manifold	Ari440	07/30/14 04:23 AM
Re: 6 pak manifold	Ari440	07/30/14 04:25 AM
Re: 6 pak manifold	tex013	07/30/14 04:25 AM
Re: 6 pak manifold	Ari440	07/30/14 04:27 AM
Re: 6 pak manifold	tex013	07/30/14 04:29 AM
Re: 6 pak manifold	Ari440	07/30/14 04:38 AM
Re: 6 pak manifold	68cuda440	07/30/14 05:18 AM
Re: 6 pak manifold	tex013	07/30/14 08:15 AM
Re: 6 pak manifold	Mr.Yuck	07/30/14 03:35 PM
Re: 6 pak manifold	68cuda440	08/01/14 06:49 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1