Quote:

Have the arp stud thinned out alittle in the middle by a machine shop.Also ck the shaft stud.




Doesnt need to be ground in half, but look at the rocker studs that came with your T&D rockers, you will see how they are ground in the center. Do the same with the 2 head studs, and you should have no issues whatsoever.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.