Quote:

Hey, I was just wondering again...do You guys think that aluminum front spring eye bushings would help? Maybe it would take out some of the movement?
Just a thought..whaddya think?



A little. But they will transmit a lot of noise on the street.

The rear end just needs to be centered compared to the front wheels. Doesn't matter where the body is. But you may have moved one wheel tub slightly more on one side than the next. Or you are taking left turn with more corning than right turns. Typically a left turn has a larger radius and more speed than right turns and lower speeds.

Even though you moved the spring in which will reduce rear roll rate, your SS spring are stiffer than the factory springs.

Just see if you can spacer the wheels out OR get smaller rear tires. Do you have long enough studs for a spacer?

Do you have sway bar tabs on your lower control arms? Just a stock front sway bar would help a lot, but will that hurt your 1/4 track performance?