11 Inch versus 10.5 in Flywheel Question

Print Thread

Re: 11 Inch versus 10.5 in Flywheel Question [Re: TimS] #154186 11/22/08 04:11 PM 11/22/08 04:11 PM
Joined: Jan 2003 Posts: 26,026 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 26,026 Rio Linda, CA	I can't picture the factory turning out a crank in other than the standard size since both the flywheel and flexplate are the same size. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 12:04 AM
Re: 11 Inch versus 10.5 in Flywheel Question	70Cuda383	11/21/08 12:07 AM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 12:51 AM
Re: 11 Inch versus 10.5 in Flywheel Question	fourgearsavoy	11/21/08 02:56 AM
Re: 11 Inch versus 10.5 in Flywheel Question	Chi_Town_Runner	11/21/08 07:29 AM
Re: 11 Inch versus 10.5 in Flywheel Question	tecmopar	11/21/08 08:07 AM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 10:57 AM
Re: 11 Inch versus 10.5 in Flywheel Question	jt4406	11/21/08 11:53 AM
Re: 11 Inch versus 10.5 in Flywheel Question	John_Kunkel	11/21/08 09:36 PM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 11:37 PM
Re: 11 Inch versus 10.5 in Flywheel Question	John_Kunkel	11/22/08 08:11 PM
Re: 11 Inch versus 10.5 in Flywheel Question	JohnRR	11/22/08 10:17 PM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/22/08 11:34 PM
Re: 11 Inch versus 10.5 in Flywheel Question	JohnRR	11/23/08 01:07 AM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/23/08 11:16 AM

Hop To