11 Inch versus 10.5 in Flywheel Question

Print Thread

Re: 11 Inch versus 10.5 in Flywheel Question [Re: TimS] #154184 11/21/08 05:36 PM 11/21/08 05:36 PM
Joined: Jan 2003 Posts: 26,026 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 26,026 Rio Linda, CA	The register on the crank flange should all be the same since the flywheel and the flexplate need to be a universal fit. The center hole in a flexplate measures 2.160". The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 12:04 AM
Re: 11 Inch versus 10.5 in Flywheel Question	70Cuda383	11/21/08 12:07 AM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 12:51 AM
Re: 11 Inch versus 10.5 in Flywheel Question	fourgearsavoy	11/21/08 02:56 AM
Re: 11 Inch versus 10.5 in Flywheel Question	Chi_Town_Runner	11/21/08 07:29 AM
Re: 11 Inch versus 10.5 in Flywheel Question	tecmopar	11/21/08 08:07 AM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 10:57 AM
Re: 11 Inch versus 10.5 in Flywheel Question	jt4406	11/21/08 11:53 AM
Re: 11 Inch versus 10.5 in Flywheel Question	John_Kunkel	11/21/08 09:36 PM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/21/08 11:37 PM
Re: 11 Inch versus 10.5 in Flywheel Question	John_Kunkel	11/22/08 08:11 PM
Re: 11 Inch versus 10.5 in Flywheel Question	JohnRR	11/22/08 10:17 PM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/22/08 11:34 PM
Re: 11 Inch versus 10.5 in Flywheel Question	JohnRR	11/23/08 01:07 AM
Re: 11 Inch versus 10.5 in Flywheel Question	TimS	11/23/08 11:16 AM

Hop To