Quote:
cut the one side and shorten it.. but
you might need the axle cut also
we were going to do that but when tearing everything down we discovered on the ds the axle was rubbing up against the wheel cylinder and put a nice groove in it( which I feel really blessed it didn't rub a hole in it while making a pass) so we are going to start from scratch and add ladder bars for a upgrade. 
71 demon stock stroke 440/indy ez-1 running 10.10 @ 132.14 mph in the 1/4 and 6.36 @ 107.46 mph in the 1/8 not in the same weekend but It did it then I sold it.
67 Belvedere that worked it's way in the 10's
| 
