I need to replace the steel line from fuel tank to the fuel pump on the road runner. Do you just buy a roll from the local parts store and bend it like the factory did or should I buy the more expensive pre-bent stuff from the restoration suppliers? Stock gas tank and line are currently on the car.

Tonight while I was replacing the short rubber hose at the gas tank, I kinked the steel fuel line by the shock and it cracked. I'm not sure if I should try to cut & flare, run longer rubber hose or just replace the whole thing.I an not that experienced with bending steel lines and not sure how everyone else does it?

Any help would be appreciated!

John